IFACx labeled conferences 2024

IFAC co-sponsorship “light” for NMOs: IFACx: This service allows IFAC NMOs to give an IFAC label to some domestic technical events organized under their supervision.

IFACx COUNTRY/REGION Events:
Each NMO can request the IFACx COUNTRY/REGION label for at most 2 domestic events. These may typically be a domestic Conference + one other event such as a summer school, a Webinar series, etc.
The labeled events are not bound to be held in English. IFAC has no financial liability with respect to these events. The technical and scientific quality is the responsibility of the NMO, without any verification by IFAC. The events should be well aligned with IFAC ́s mission of promoting automatic control, and
respectful of IFAC’s code of conduct www.ifac-control.org/about.

Application Document:
In a single document, the NMO should provide for each event:
- Name of the event, location, dates
- Type of event: Conference, School, etc.
- Website (will be used by IFAC to promote the event)
- Short description (typically 1 or 2 sentences)

Validation by IFAC:
All submitted requests shall receive the approval of the Technical Board and Conference Board Chairs.
Approval ensures advertisement of the event in the IFAC channels (website, newsletter, social media etc.)
and gives the right to use the "IFACx COUNTRY/REGION" logo.

The following events were approved for 2024

Name of the event, location, dates:
Congresso Brasileiro de Automática (CBA 2024), Rio de Janeiro, Brazil, October 15-18, 2024
Type of event: Conference
Website https://cba2024.eventos.ufrj.br/
Short description:
The 25th CBA 2024 is the most important Brazilian conference in the field of Automatics and will be held in the city of Rio de Janeiro, promoting the integration of scientific, academic and industrial communities on topics of Control, Automation, and Robotics. 

 

Name of the event: 2024 IEEE International Conference on Automation / XXVI Congreso de la Asociación Chilena de Control Automático, ACCA (IEEE ICA- ACCA 2024)

Location: Universidad de Santiago de Chile, Santiago Chile, (CEPEC-USACH, Cruz del Sur # 77, Las Condes, Metro Escuela Militar, Santiago, Chile)

Dates: October 20-23, 2024
Type: Conference
Website https://ieee-ica-acca-2024.cl/

Short description: This is a biannual event organized by ACCA since 1974 and, since 2014, is held together with IEEE International Conference on Automation (IEEE ICA), in collaboration with IEEE Chilean Chapters on Control Systems, to promote all areas of the automation and control applications on communication, biomedical engineering, power engineering, and industrial engineering. In 2024, the conference will celebrate the 50th anniversary of the ACCA, and the Conference Lemma will be “Digital Transformation for Sustainability “. This will be a great opportunity to discuss how the control community from Chile, and more widely since Latin America, can contribute to this aspect and how digital transformation can help to create a more sustainable world.


 

Name of the event, location, dates: SAGIP 2024, Lyon, France, May 29-31, 2024
Type of event: National Conference
Website https://sagip2024.sciencesconf.org/
Short description:
The national congress SAGIP 2024 will be organized in Lyon, France on May 29-31 2024 by the 3 laboratories member of SAGIP in Lyon: Ampere, DISP (Decision and Information Systems for Production systems) and LAGEPP (Laboratoire d'Automatique, de Génie des Procédés et de Génie Pharmaceutique). This event is co-sponsored by the SAGIP national association and by the CNRS GDR MACS.
The objective of the annual SAGIP national congress is to present the research in the field of automatic control and industrial engineering carried out in French universities, public research organisations and laboratories, and in companies, as well as the use and insertion of automatic control and industrial engineering in industry, services, and communities.


 

1) the annual German AUTOMATION congress
Name, location, dates:
VDI Congress AUTOMATION, Congress Center Baden-Baden, July 2 and 3, 2024 (annually)
Type of event: Conference
Website https://www.vdi-wissensforum.de/automatisierungskongress/
Short description:
AUTOMATION is the leading congress in measurement and automation technology and a partner event of the VDI Wissensforum and the VDI/VDE-GMA. With six parallel tracks, the congress is the largest networking event in the field of automation, bringing together science and industry in Germany. This congress is a call for paper event with paper selection by a program committee consisting of experts of academia and industry. Seven main topics form the framework of this event: Factory Automation, Process automation, Methods and synergies, Automation Technology, Artificial Intelligence & Autonomous Systems, Industrial  Communication and Data Science for Automation.

2) annual scientific workshop
Name, location, dates: Joint workshop of technical committees “Modeling, identification and simulation in automation” and “Systems theory and control”, Anif near Salzburg, Austria, September 2024 (annually)
Type of event: Scientific Workshop
Website: https://tu-dresden.de/ing/elektrotechnik/rst/das-institut/gma-fa-1-40
Short description:
Two technical committees of GMA's automation technology methodology division organize an annual joint workshop with lectures and intensive discussion. Traditionally, this workshop of the German member organization GMA takes place near Salzburg in Austria. The GMA Technical Committee FA 1.30/FA 2.13 is dedicated to questions of modeling, identification and simulation of dynamic systems at the interface to control engineering. The focus is on theoretical aspects and numerical methods as well as concrete applications from industry and research. The GMA Technical Committee FA 1.40/FA 2.14 deals with current developments in control theory and their application in the industrial environment. The main topics are model predictive control of dynamic systems, nonlinear observers and state estimators as well as control of networked and distributed parametric systems.


 
Name of the event, location, dates:
67th Japan Joint Automatic Control Conference (JJACC), Himeiji, Japan, November 23-24, 2024
Type of event: Conference
Website: https://www.rengo67.iscie.or.jp/
Short description:
JJACC has been held annually since 1958 and is organized by the Japan NMO, which is part of the Science Council of Japan. The conference is sponsored by seven societies related to automatic control, including SICE, ISCIE, and JSME.

 

 

Name of the event: 2024 The 39th ICROS Annual Conference (ICROS 2024)
Location: Daejeon Convention Center, Daejeon, Korea
Dates: July 2~4, 2024
Type of event: Conference
Website: https://2024.icros.org
Short description:
ICROS 2024 is the main domestic conference of ICROS (Institute of Control, Robotics and Systems). The main themes of the conference are control and robotics. The conference's language is Korean.


 

1) (Conference) Name: Congreso Nacional de Control Automático, CNCA 2024.
Location: Ciudad de México, México. Dates: October 2-4, 2024.
Website:
http://amca.mx/congresos/cnca2024/
Description: The CNCA is recognized as the Mexican conference dedicated to presenting and sharing the advancement of the theory and practice of systems and control. The CNCA is hosted by the NMO AMCA (Asociación de México de Control Automático) in cooperation with Mexican academic institutions.

2) (Summer School) Name: Escuela de Verano de Control Automático. Location: Ciudad
de México, Mexico. Dates: June 13-14, 2024. Website: http://amca.mx/escuelas/
Description: The AMCA-Summer School is mainly intended for master's and Ph.D. students, researchers, and scholars interested in the theory and practice of automatic control and new and emergent related areas.

Name of the event, location, dates : JORNADAS DE AUTOMÁTICA, MALAGA,
Type: Conference
Website: https://jautomatica.es/
Short description: This is the annual event organized by CEA and which has the participation of a large number of its members. The event presents scientific works but also addresses issues of interest to the community.

Name of the event, location, dates
The 14th UK Automatic Control Council International Conference (Control 2024) will be held from 10th to 12th April 2024 in Winchester, UK.
Type of event; International conference
Website https://control2024.uk/
Short description
UKACC International Conference on Control is the biannual conference of the UK Automatic Control Council, the UK national member organisation of the International Federation of Automatic Control (IFAC). Control 2024 will include keynote presentations by internationally renowned researchers, mini-symposiums by UK based institutions, and contributed and invited papers from academia and industry covering all core areas of control systems engineering. It will also feature tutorial sessions, special sessions as well as posters for early career researchers Control 2024 is hosted by University of Southampton, and co-sponsored by IEEE UKRI Control Systems Chapter, Institution of Engineering and Technology (IET), Institution of Mechanical Engineers (IMechE), Institute of Measurement and Control (InstMC), and Institution of Chemical Engineers (IChemE).

Sitemap