IFACx labeled conferences 2023

IFAC co-sponsorship “light” for NMOs: IFACx: This service allows IFAC NMOs to give an IFAC label to some domestic technical events organized under their supervision.

Each NMO can request the IFACx COUNTRY/REGION label for at most 2 domestic events. These may typically be a domestic Conference + one other event such as a summer school, a Webinar series, etc.
The labeled events are not bound to be held in English. IFAC has no financial liability with respect to these events. The technical and scientific quality is the responsibility of the NMO, without any verification by IFAC. The events should be well aligned with IFAC ́s mission of promoting automatic control, and
respectful of IFAC’s code of conduct www.ifac-control.org/about.

Application Document:
In a single document, the NMO should provide for each event:
- Name of the event, location, dates
- Type of event: Conference, School, etc.
- Website (will be used by IFAC to promote the event)
- Short description (typically 1 or 2 sentences)

Validation by IFAC:
All submitted requests shall receive the approval of the Technical Board and Conference Board Chairs.
Approval ensures advertisement of the event in the IFAC channels (website, newsletter, social media etc.)
and gives the right to use the "IFACx COUNTRY/REGION" logo.

The following events were approved for 2023:

Name of the event, location, dates:
1. XVI Simpósio Brasileiro de Automação Inteligente (SBAI 2023, XVI Brazilian Symposium on
Intellingent Automation)
2. X Simpósio Brasileiro de Sistemas Elétricos (SBSE 2023, X Brazilian Symposium on Electrical
Systems) to be held in Manaus (Amazonas, Brazil), from 15 to 18 October, 2023, at Studio 5 Centro de Convenções, Av. Rodrigo Otávio 3373, Crespo, Manaus / AM.
Type: Joint national symposia.
Website: https://sbai2023.com.br/
Short description:
These two Symposia are bianually organized by the SBA. They are the main scientifc events on Inteligent Systems, Automation, and Control (SBAI) and on Electrical Systems (SBSE), including control, automation and optimization, of the Brazilian community and the bigger conferences in their respective areas in Latim America. Usually SBAI receives 650 submissions and accepts about 450 papers; SBSE receives 430 works and accepts around 300 papers. In both events, papers can be written in Portuguese, English, or Spanish and are subject to a rigorous peer-review process.


Name of the event, location, dates:
SAGIP 2023, Marseille, France, June 6-8 2023

Type of event: National Conference
Website (will be used by IFAC to promote the event): https://sagip2023.lis-lab.fr
Short description:
The national congress SAGIP 2023 will be organized in Marseille, France on June 6-8 2023 by the LIS laboratory (Laboratoire d’Informatique et Systems) (www.lis-lab.fr). It is co-sponsored by the SAGIP national association and by the CNRS GDR MACS. The objective of the annual SAGIP national congress is to present the research in the field of automatic control and industrial engineering carried out in French universities, public research organisations and laboratories, and in companies, as well as the use and insertion of automatic control and industrial engineering in industry, services, and communities.


1) the annual German AUTOMATION congress
Name, location, dates:
VDI Congress AUTOMATION, Congress Center Baden-Baden, June 27 and 28, 2023
Type of event: Conference
Website: https://www.vdi-wissensforum.de/automatisierungskongress/
Short description:
AUTOMATION is the leading congress in measurement and automation technology and a partner event of the VDI Wissensforum and the VDI/VDE-GMA. With six parallel tracks, the congress is the largest networking event in the field of automation, bringing together science and industry in Germany. This congress is a call for paper event with paper selection by a program committee consisting of experts of academia and industry. Seven main topics form the framework of this event: Factory Automation, Process automation, Methods and synergies, Automation Technology, Artificial Intelligence & Autonomous Systems, Industrial  Communication and Data Science for Automation.

2) annual scientific workshop
Name, location, dates:
Joint workshop of technical committees “Modeling, identification and simulation in automation” and “Systems theory and control”, Anif near Salzburg, Austria, September 2023 (annually)
Type of event: Scientific Workshop
Website: https://tu-dresden.de/ing/elektrotechnik/rst/das-institut/gma-fa-1-40
Short description:
Two technical committees of GMA's automation technology methodology division organize an annual joint workshop with lectures and intensive discussion. Traditionally, this workshop of the German member organization GMA takes place near Salzburg in Austria. The GMA Technical Committee FA 1.30/FA 2.13 is dedicated to questions of modeling, identification and simulation of dynamic systems at the interface to control engineering. The focus is on theoretical aspects and numerical methods as well as concrete applications from industry and research. The GMA Technical Committee FA 1.40/FA 2.14 deals with current developments in control theory and their application in the industrial environment. The main topics are model predictive control of dynamic systems, nonlinear observers and state estimators as well as control of networked and distributed parametric systems.


Name of the event, location, dates:
1st International Workshop on Quantum Algorithms, Machine Learning and Control, 22-23 June 2023, Trinity College Dublin, Ireland.
Type of event: Workshop
Website: will be designed
Short description:
This workshop focusses on theory and applications in the emerging field of quantum algorithms and their applications to problems in science and engineering. Two special areas of focus are Quantum Machine Learning and Quantum Control.



Name of the event: SIDRA PhD School on Automatica
Location: Bertinoro (FC), Italy
Dates: the School is usually organized in the first or second week of July (2023 edition: July 3-8, 2023)
Type of event: Summer school for PhD students in systems and control
Website: sidra2022.dei.unibo.it/ (2022 edition). The list of previous schools is available at http://www.automatica.it/scuole-di-dottorato/
Short description:
The SIDRA PhD School on Automatica is organized annually since 1997 by SIDRA, the Italian Society of PhD and Researchers in Automatica. The School is always held in July in the beautiful location of Bertinoro (FC). It consists of a week of classes: usually two parallel courses by renown international researchers in the field, and the topics are selected trying to cover both theoretical and technical aspects. The School is held in a friendly and stimulating environment and every year approximatively 60 PhD students from Italy and other countries attend it. A final exam is organized for students for obtaining the credits. The School has two scientific coordinators selected by SIDRA. Since 2012 Prof. Maria Elena Valcher (University of Padova) and Prof. Claudio Melchiorri (University of Bologna) have been indicated as coordinators of the School. This initiative has also the sponsorship of the IEEE RAS and IEEE CSS Italian Chapters.


Name of the event, location, dates:
66th Japan Joint Automatic Control Conference (JJACC), Sendai, Japan, October 7 (Sat) and 8 (Sun), 2023
Type of event: Conference
Website: https://www.sice.jp/rengo66/
Short description:
JJACC has been held annually since 1958 and is organized by the Japan NMO, which is part of the Science Council of Japan. The conference is sponsored by seven societies related to automatic control including SICE (The Society of Instrument and Control Engineers), ISCIE (The Institute of Systems, Control and Information Engineers), and JSME (The Japan Society of Mechanical Engineers).



Name of the event: 2023 The 38th ICROS Annual Conference (ICROS 2023)
Location: Sol Beach Hotel & Resort Samcheok in Samcheok, Korea
Dates: June 21-23, 2023
Type of event: Conference
Website: http://2023.icros.org/
Short description:
ICROS 2023 is the main domestic conference of ICROS (Institute of Control, Robotics and Systems). The main themes of the conference are control and robotics. The conference language is Korean.


1) Conference
Name: Congreso Nacional de Control Automático, CNCA 2023.
Location: Acapulco de Juárez, Guerrero, México.
Dates: October 23-27, 2023.
Website: http://amca.mx/congresos/cnca2023/
Description: The CNCA is recognized as the Mexican conference dedicated to presenting and sharing the advancement of the theory and practice of systems and control. The CNCA is hosted by the NMO AMCA (Asociación de México de Control Automático) in cooperation with Mexican academic institutions.

2) Summer School
Name: Escuela de verano de Control Automático.
Location: Mexico City, Mexico
Dates: June 26-30, 2023.
Website: http://amca.mx/escuelas/
Description: The AMCA-Summer School is mainly intended for master's and Ph.D. students, researchers, and scholars interested in the theory and practice of automatic control and new and emergent related areas.


Name of the event, location, dates:
24th International Conference on Process Control, Strbske Pleso, Slovakia, June 6-9, 2023
Type of event: Conference
Website: https://www.process-control.sk/
Short description:
The conference's objective is to bring together theory experts and control systems practitioners to evaluate the new avenues for techniques, design procedures and instruments in process control. This conference has a long tradition of inviting plenary speakers who are at the top of their fields while opening the possibility of submitting papers in 4 main domains, like Linear and Nonlinear Control, Optimization and Computing in Control, Machine Learning and Control, and Sustainable Industrial Production and Applications.


Name of the event, location, dates:
Conference on Automation in Industry and Economy, which will be held from April 13-14 2023 in Maribor, Slovenia
Website: https://www.aig.si/; on the site the web pages of all past AIG conferences from 1999 to 2021 are shown, while the 2023 conference web page will appear on the website in the near future.
Short description:
The AIG conference is the main event in the field of automation in Slovenia with local and foreign professional keynote speakers, and professional or scientific papers reflecting good manufacturing practices. The main topic of the 2023 conference will be Factories of the future and the green transition to society 5.0.


Name of the event, location, dates: Jornadas de Automática 2023, Zaragoza, 6-8 September 2023
Type of event: Conference
Website: https://jautomatica.es
Short description:
"Jornadas de Automática" is CEA flagship event. It is an annual event with more than 40 years of history. The event brings together a large number of control professors from all over Spain and other countries. In addition to thematic meetings, the event allows the presentation of new results in poster form.


Name: Symposium on Complex Interconnected Systems and Decision Making in Measure Spaces
Location: Hochschule für Technik FHNW, Klosterzelgstrasse 2, 5210 Windisch, Switzerland
Type of event: symposium
Website: https://nccr-automation.ch/events/2023/nccr-symposium-day-1-complex-interconnected-systems-and-decision-making-measure-spaces
2 half days of scientific talks on the theory of interconnected complex systems and decision making in measure spaces. At the end of each day, there will be a panel session discussing the challenges and future research directions
2 half days on Diversity and Inclusion: featuring speakers from KTH (Sweden) and Einstein Center Digital Future (Germany)
1 half day on Knowledge and Technology Transfer: Industry applications of automatic control, featuring speakers from various industry sectors.